We offer industrial lifting cylinders as individual as your needs. Below, you can make a product pre-selection – and then we will customize your actuator to meet your exact special requirements. Our lifting cylinders are built for use in industrial plants under the toughest conditions and comply with all applicable standards and regulations. You can find all the details in the corresponding technical data (free to download). Whatever your needs, we have the optimal lifting cylinder for reliable and safe lifting. If you have any questions, please do not hesitate to contact us.
Lifting cylinder A4
The EUBA lifting cylinder A4 is an electro-mechanical drive with trapezoidal threaded spindle. The spindle is protected against external influences by a hard chromium plated steel tube and internally secured against rotation. The mechanical connection to the existing system is realized by means of a trunnion and clevis with pin or swivel head with bearing. The flange-mounted motor is a DIN IEC standard- or geared motor. The overload-, position indicator- and motor connections are located in external, easily accessible terminal boxes.
- Adjustment force up
to 5 kN - Stroke up
to 600 mm - Speed up
to 90 mm/s
Lifting cylinder B4
The EUBA lifting cylinder B4 is an electro-mechanical actuator with trapezoidal threaded spindle. Also in this model the spindle is protected against external influences by a hard chromium plated steel tube and internally secured against rotation. Standard protection class is IP-55, on request EUBA actuators can also be designed in IP-54 to IP-67. For all configurations please contact us. We will gladly advise you on any questions that may occur.
- Adjustment force up to 25 kN
- Stroke up
to 1.300 mm - Speed up
to 180 mm/s
Lifting cylinder C4
The EUBA lifting cylinder C4 is an electro-mechanical actuator with trapezoidal threaded spindle. It is used, for example, in steel mills, power plants, cement works or in hydro engineering. As with all our lifting cylinders, the spindle of the EUBA C4 is protected against external influences by a hard chromium plated steel tube. Internally, the product is secured against rotation. Standard protection class is IP-55, on request EUBA actuators can also be designed in IP-54 to IP-67.
- Adjustment force up
to 50 kN - Stroke up
to 2.500 mm - Speed up
to 180 mm/s
Lifting cylinder D4
EUBA lifting cylinder D4 is an electro-mechanical actuator with trapezoidal threaded spindle. Standard protection class is IP-55, on request EUBA actuators can also be designed in IP-54 to IP-67. The steel tube, which protects the spindle against external influences, has a hard chrome plating against rust. Thrust tube and trunnion can be made in -VA (1.4301). For further configuration possibilities, please refer to the technical data or contact us.
- Adjustment force up to 150 kN
- Stroke up
to 4.000 mm - Speed up
to 90 mm/s